Search Results

❌ DO NOT BUY This is a sweep of the "5dBi" Gorilley antenna, which looks like an ALFA 5 dbi knockoff, which ended up being a fake. Result: -6.4 dB at 915mHz is BAD, and it only slightly resonates at 1.2GHz... This is a bad antenna, do not purchase. Purchase li...

      Fiberglass Antenna Kit For 902-928MHz 8dBi 1300mm   Comes with an antenna pole bracket and a 1m N female to RP-SMA male (RP is a weird inversion) This antenna is the backbone of our core Meshcore network in Ottawa. It has been proven to allow for long di...

Also known as TBRG —  greg_ca on Discord Hello, I'm Greg I'm located in Ashton, Ontario, just west of Ottawa, and have been involved with the Ottawa mesh community since around June 2024. My background is in IT and electronics, and I operate The Board Repair G...

Overview Ashton_GrainBin is a MeshCore repeater located at JockBrae Farm in Ashton, Ontario, installed on the farm's grain elevator. The elevated site provides a good vantage point for coverage through the Ashton, Beckwith and surrounding western Ottawa / east...

CBCC is a solar repeater hanging in a tree beside the Constance Bay community center. https://yow.meshmapper.net/?repeater=09C520%2C45.49902%2C-76.09077&preset=all The goal of this repeater was to bring reliable MeshCore communication to the community center a...

Waterproof Case Heltec V3 (Soon to be updated to V4) 5.8 dBi fiberglass antenna 10,800 mAh PowerBank Raspberry Pi 3B+ PoE to USB/Eth Adapter -PowerBank powers Pi -Pi manages/powers Heltec via USB -PoE into adapter, charges Powerbank on USB-C and Ethernet to Pi...

Use those commands for your Ottawa repeater To access the command line use https://meshcore.io/flasher top right console, or connect to the repeater with you companion using admin console in the repeater contact on your companion: set path.hash.mode 2 set adve...

#onqc We started using the meshcore channel #onqc to chat with Montréal through the region wall (Rigaud) in a flood # group channel. the way to do this is to add the channel then, in the channel, click the top right 3 dots, then set region scope. If the list i...